More than 1000 installations in 48 countries, with 750 for film and paper and 250 in the Automotive Industry.

Dynamism, Innovation, Research, Passion

These are the elements that characterize the esseCI, founded in 1969 to make up for the lack in the territory of qualified personnel capable of carrying out particular and innovative industrial plants and related maintenance.

Over time, a particular activity has taken over the others: the design and construction of plants and machinery for flame treatment.

Since 1974, the first flame treatment plants (rudimentary if compared to today’s sophisticated machinery and plants) began to appear at the service of the most important Italian industries of the time.

Then, in the early 1980s, the foreign market was also attacked. Also in the 80s, Dynamism, Innovation, Research and Passion suggested to propose flame systems in the automotive field for the treatment of all car parts (bumpers, headlights) that began to be made of polypropylene: and it was a success! esseCI plants were installed in Fiat production plants (Mirafiori, Cassino), Alfa Romeo, Renault, Piaggio, Ford, General Motors. At the same time, Dynamism, Innovation, Research and Passion have brought esseCI flame plants to the polylaminate market (converting, as defined by specialists in the sector).

Dynamism, Innovation, Research, Passion are recognized internationally during the 90s: the market is no longer European, but becomes the world and all the giants producers of polypropylene for flexible packaging for food use have at least one esseCI plant.

The new frontiers? Thanks to Dynamism, Innovation, Research, Passion we have achieved obsessive combustion controls because in a sustainable world nothing must be wasted, everything must be concentrated for the final result. Dynamism, Innovation, Research, Passion have suggested the frontier of doped mixtures and are also guiding us towards the study of surfaces since “Surfaces were invented by the devil” (Prof. Wolfgang Pauli, Nobel Prize in Physics in 1945).

Flame Treatment System EsseCi
Flame Treatment System EsseCi

OUR COMPANY IS COMPOSED OF

  • Design technical office

  • Mechanical and assembly workshop

  • Electrical workshop

  • Carpentry workshop

  • Administration

  • R&D office and test laboratory with pilot machines

  • Service office operating worldwide

The total number of employees exceeds 30 units including managers, employees and technical staff.

EsseCI Chronicles

1999

Introduction to the esseCI “twin burner” system.

2017

Lambda control system for air/gas ratio.

2016

The longest differenziated double burner system (10.5 mt, 600 m/min speed, 1800+1200 cu/m mixture ).

2015

Flame plant remote supervision.

2010

Introduction to the esseCI system based on the “energy saving” concepts.

2005

Introduction to the esseCI “exhaust vacuum” system.

2003

Application of esseCI flame treatment on “ Synthetic paper ”.

2003

9th International meeting on flame treatment, with main BOPP line manufacturers as: BRUCKNER, LINDAUER, DORNIER, DM

2002

Application of esseCI flame treatment on white-opaque “Pearlized” film.

1996

Production line speed reaches 450 mpm.

1994

Introduction to the chilled roll for esseCI flame treatment system.

1972

The 1st  in the world  industrial flame treatment equipment for BOPP film, sold to Moplefan Co. Specs : 1,5 mts width; 25 mpm;

1992

Application of esseCI flame treatment on PET (Polyesther) film (NUROLL).

1990

The 1st sperimental research on combustible added mixtures (MOBIL USA).

1987

The 1st International meeting on the flame treatment in Italy.

1986

Application of esseCI flame treatment on CAST film.

1984

Introduction to the new “polarized” flame on esseCI treatment system.

1984

The 1st , industrial flame treatment equipment for BUMPERS, to be painted.

1980

The 1st , industrial flame treatment equipment for BOPP film, in BELGIUM sold to MOBIL Plastics Co.

1977

The 1st , industrial flame treatment equipment for BOPP film,  in SPAIN sold to Manuli Co.

1973

The 2nd  industrial flame treatment equipment for BOPP film, sold to Moplefan Co. Specs : 6,0 mts width; 180 mpm;

More than 1000 installations in 48 countries, with 750 for film and paper and 250 in the Automotive Industry.